Author Archives: giles

Heart Nebula – More Data from 9th October, Oiii & Sii subs

So last night, we obtained some more Oiii sub-exposures in order to bring the number to the same level as our Hydrogen Alpha sub-exposures. I also started to obtain some Sii exposures, only managed 10 or so for each pane of the mosaic.
It looks like I should obtain more Hydrogen Alpha sub exposures as well now, as the quality does not appear to be as good as the other narrow-band wavelengths, and of course Hydrogen Alpha is a strong part of the composition.
You will notice we are now using a different palette for the RGB composition.
I probably need to flex up some of my GIMP processing skills as I still feel I am floundering around not really knowing what I am doing.
Anyway, without further ado, please find below the current rendition:

Here is a link to the online worldwide telescope

Heart Nebula – More Data from 26th / 27th September

So I managed to get some extra frames for the Heart Nebula.

I’m now working with around 190 individual frames, so my registration and integration process is changing, as rather than just load all the frames and tell APP to work on them, the DDC is taking an inordinate amount of time, and I suspect that this also affects other processing later on.

So, now, we load each pane of the mosaic, and integrate them separately using a normal registration process. After which we then do a single mosaic registration and integration with the eight panes, 4 per channel of Ha and OIII.

Here are the results:

We can see here, how the detail comes, and aberrations recede as we add more data. Below, upper image is the intermediate, while the lower image is the original initial data acquired.

Heart Nebula – Rework of Data from 9th September

Thought I would rework the data of the Heart Nebula IC1805, I have managed to obtain some darks and bias frames. So I loaded everything into Astro Pixel Processor and started the registration and integration process. I’ve now discovered that there must have been some alignment issues during capture as there is a distinct rotation artefact in the top left frame. Still, this one has more contrast, and we can see more detail than before.

Confirmed – Evidence for Life on Venus through presence of Phosphine.

Well, a rumour going around that there is life on Venus.

There will be an online press conference at 15:00 GMT (16:00 BST), but it amounts to measurements of levels of phosphine (PH3) being far too high in the region of potentially habitable space in Venus’ atmosphere. Levels far too high, to have been produced via chemical processes. Or so the scientists say – remember the cold fusion thing in the eighties?

Although this video has already appeared, and the videos below are what should go live at 16:00 BST.

This is the Press Conference Link:

This is the news explainer:

ZWO ASI290MM mini & ZWO Helical Focuser have arrived

So, at last the ASI290MM mini & Helical Focuser have arrived. This will hopefully be a significant improvement to guiding.

But first, some backstory.

Back when I went and got my main imaging camera, the ASI1600MM Pro, I bought the set of the 8-slot Filterwheel, all the filters (L,R,B,G,Ha,OIII,SII) and an Off-Axis-Guider (OAG). I was looking for a reasonable guide camera to attach to the OAG. The long list of equipment for the imaging train meant that my budget was somewhat limited. I chose the ASI120MC-S.

Really, the ASI120MC-S does guide quite well, but it is not entirely suited to the task. Firstly it is a colour planetary camera. Colour is not necessarily of any use when guiding, and might even hinder it for all I know, but at the time, completely new to astrophotography (and not really experienced now!). I thought, well, it will probably work for guiding, and I might be able to use it for other things too. In any case that’s what I got, and it has served me well for guiding.

Recently I’ve been looking to see whether I could get some improvement in this area, and eventually decided that the ASI290MM mini might suit pretty well.

Let’s look at some comparisons from the graphics at the ZWO website. First, the ASI120MC-S

Now, the ASI290MM mini:

OK, so the sensor on the ASI290MM is bigger, but so is the resolution, the pixel size on the 120 is 3.75 um, the specs don’t highlight that on the ASI290MM, but I believe the pixel size on that is 2.9 um. The read noise on the ASI290MM is a lot lower, also note that on the mini it is USB2.0 rather than USB3.0, which probably counts for why the frame rate on the AS120MC-S is higher. It is difficult to compare QE between the two, the MM mini slightly higher.

Clearly with the ASi120MC-S having a full well 13000, capable of higher frame rates, seem to lean that this is a camera meant for planetary imaging, which can do guiding, whereas the ASI290MM mini is a guide camerea, that you might be able to do some mono planetary imaging. So the mini is squarely aimed at guiders, and I hope it will excel at first light.

The areas where the ASI120MC-S excels at better than the ASI290MM mini are not significant for guiding, and the areas where the ASI290MM is better (lower read-noise, more pixels, lower pixel size) are all areas which should improve guiding, hopefully allowing me to reduce exposure times and cope with the small amount of light pollution I sometimes have.

Here are some pictures of the imaging train:

Update:

So I had my first outing with using the ASI290MM mini as a guide camera last night. I can confirm that the camera behaves as a distinct step up when compared against the ASI120MC-S. Firstly, with exposures set to 1s and binning set to 2×2 I was able to constantly guide without losing a star for quite a few hours, and the only times I lost guiding was when I attempted more aggressive settings. The frame acquisitions during guiding showed considerably less noise, and it should be noted that I was guiding without any dark or calibration frames. The helical focuser was great as well, I was able to quickly use ASICAP on my Tablet to ensure that the guide camera became parfocal with the main imaging camera. It literally just took a few seconds, and the position was easily locked into place with the thumbscrew. My experience of trying to use the adjustments on the OAG previously had led to a lot of frustration messing about with Alan keys in the dark trying to achieve some sort of focus. The clamp on the helical focuser also allows for rotating the guide camera to ensure that it is somewhat aligned properly with the mirror and/or the main camera. I’m of the opinion that with time, and the upcoming upgrades to OTA and focusing I will routinely be achieving sub-arcsecond guiding.

Heart Nebula 9th September 2020

So, it is estimated to be a wait of 5 more weeks before I get the Apochromatic Esprit 120. For the time being I’m messing around with the Startravel Achromatic.

Here is last nights attempt at HOO 4-pane mosaic of the Heart Nebula, each pane is 5 x 300s exposures.

I have not done any calibration frames for this set up as I am going to overhauling a lot of the equipment soon, which is why you see some mosaic artefacts between the merged panes.

Gearing up for a new season of astrophotography

I’m gearing up for a new season, we have some pretty poor autumnal weather here at the moment, and very few clear skies forecast for quite a few days.

However, I have placed an order for the following new equipment:

  • A SkyWatcher Esprit 120ED Pro Triplet Apochromatic Refractor. This is to replace my achromatic SkyWatcher Startravel 120T. Unfortunately there is a long leadtime on these to arrive from China, so it might not be until November that we see first-light with it.
  • A Field Flattener purpose made for the above, to ensure better astrophotography results.
  • An Astro Essentials Filter Cell Adapter, which should allow me to fit a light pollution suppression filter between the field flattener and the focuser on the Esprit.
  • An IDAS P2 Light Pollution Suppression Filter to be used in the above (2″).
  • A Primaluce Lab Sesto Senso V2, this is a a stepper motor to replace the HitecAstro DC motor, it should be more accurate with less slippage, although going with an Apo should mean I have to spend less time refocusing during filter changes.
  • A Temperature sensor for the Above.
  • A 17ah Powertank – I will be trying to power all my kit from a battery this year, in preparation to see if travelling to a dark-skies site could be possible.

I suspect that this means that I will soon put the StarTravel 120T, with its focus motor and HitecAstro DC unit on the second hand market, it will come with a fabric carrying case as well, and I may be able to throw in a few extra accessories.

Of course, it all depends on when the above will arrive, which is forecast to be around 10-12 weeks at the moment.

I’ve also gone to place an order for the following now:

  • ZWO ASI 290MM mini USB2 mono camera for guiding
  • ZWO 1.25″ Helical Focuser for the above

On briefly attempting to guide with my ASI120MC-S at the weekend, I was reminded how noisy a camera it can be, and unfortunately, while I bought it for guiding I kind of let myself be lent to a possibility of doing planetary imaging, which it is probably more suited to. The ASI290MM should be a better dedicated guiding camera, and I hope the helical focuser will allow focusing off the off-axis-guider easier.

Clear Skies All!

IC1848 continued, Hydrogen-alpha mosaic

Still a work in progress, will probably work on some other channels to add.

I’ve not uploaded the video of processing the mosaic as it was necessary to use a downgraded version of the software due to bug in the current version, I had that version on my laptop, so I used that to stack the mosaic, but don’t have Video recording software I know how to use on the laptop.

Will re-do when there are more sub-exposures available, and the bug in the software is fixed.

Faffing Around, trying to get automated Astrophotogrphy working

OK, so the worst conception you can have about someone into astronomy, is that they sit around, outside, with a thermos flask, looking at sky pictures.

The truth is we, astrophotographers, sit indoors, during this time of self-isolation and social-distancing, trying to work out how to get the telescope to work itself.

This is fraught with problems, and a lot of the time, means going outside to check that everything is actually doing what it is supposed to do.

Quick video, feel free to fast forward, on how that process works.

Final picture to follow…

Practice Processing with Example Data from the Internet (M31)

This is an example of processing data of the Andromeda Galaxy, with Astro Pixel Processor. The data was obtained from the Internet, rather than captured with my equipment (cloudy and windy the last few nights).

Here is the link to the raw data:

http://www.astropix.com/html/i_astrop/practice_files.html

There are some other targets available there, I’ve seen some other processed data and the nebulae are quite astonishing.

An issue I have with using practice data, is that often the data is just too perfect, otherwise it won’t have found its way on to the Internet. It sometimes is more instructive to try and process bad data and make something good of it rather than process just good data.

Soul Nebula (IC1848) Revisited

So, another cloudless night, how lucky we are. Disappointed with the results of two nights ago, I revisited the Soul Nebula, and this time get somewhat better quality in places that were disappointing. Here are the new results.

I may try and join the two sessions together and see whether I can pull any more detail from the two.

So. Now what we are able to do, if merge the results from Monday evening with the results from Wednesday and build a composite mosaic, I fiddled with the colour palette to bring out the detail. We can continue to add exposures and the mosaic would eventually lose the noticeable borders.

Bode’s (M81) and Cigar (M82) Galaxy

Seems everyday is fraught with issues, which emphasises the real need to following a set workflow for set up of your rig if you are not lucky enough to have a permanent set up.

Mistakes this time round included, but probably not limited to:

  • Forgetting to attach counter weight to the counterweight bar
  • Mounting Filter-wheel in the camera train pointing downwards (M81 is pretty much at the zenith for my latitude, and hence the filter-wheel collided with the mount during exposures – which had to be discaraded).

It’s a case of constant learning. I did draft a workflow document, but the weather meant I did most of the set up in the dark. Time to update the document with the lessons learned and remember to actually follow it in the future.

5 120s L, R, G & B exposures, no darks, bias, or flats used (was annoyed and kicking myself for the problems, so didn’t bother.)

North Americcan Nebula

This is another attempt at my astrophotography. The North American Nebula.

Still issues, was trying out a battery to see if I could power the rig at a remote site, things started to go wrong and I had to discard all the Luminance exposures.

I had wanted to get more exposures, but unfortunately, after sorting out the issues and reverting to AC power source there was no time.

I also wanted to focus between each filter change (as the scope is achromatic), but missed that setting, hence the blue fringes for the stars.

The narrow band filters came out OK though.